Send us a Message

We're always here for you, tell us how can we help?
Raw water pump
BW8-30/1.5kw
PP Filter CartridgePrecision Filter
40”-50uPP
Pressure gauge
20”-5u
UF Membrane
UFf200B
Air compressor
220v/50HZ/CN
Ajustment Valve
DN25
Pressure Vessel
3672
Start-Up & Operation Sequence 1.Connect the feed water inlet, product water output, waste water output 2.Install the security filter and UV lamps, dosing system. Check to make all the valve in right status 3.Connect the power and turn on “power switch” (Emergency stop) 4.Note: Turn on raw water pump 1# in manual status 5.Firstly, set the sand filter, manganese filter, carbon filter and softener to backwash and rinse status. Make sure the waste not entry into the UF membranes. Both filter begin to run. Continue running until the discharge water is clean! They will go to the normal filter status. 6.Turn on the inlet valve, rinse drain valve in manual status. Make sure it runs for 2 mins so that clean UF membranes. 7.When the above steps finished, turn on the all valves and pumps in auto status. 8.The system will running automatically. 9.You can set the running parameters of valves and pump through Touch screen on basis of real requirements. 10.Press the reset bottom, the UF will stop with setting stop procedures Maintenance 1.Filter cartridges, UF membranes replacing: (1)PP Filter cartridge’s service life mainly depends on raw water quality, but normally they can service for 3 months if the raw water if from tap. (2)UF membranes normally can service for 3-4 years. If you found the output rate is decreasing or after chemical cleaning, the product still bad, please replace them. (3)When the machine running, make sure the tanks of the dosing systems have enough liquor.

Packaging: Wooden Case, Carton Box or Export  Neutral Packing

Shipping: We will choose the fastest with the cheapest shipping mode for you by air, sea or courier.

Why Choose Us
Brand Advantage
Established in 2008, Ocpuritech, is one of leading water treatment system assembling and equipment suppliers in city of Guangzhou
in China. The company complete ten years in the water treatment business by 12th June 2018.
Technical Advantage
Nowadays Ocpuritech combines the experience and existing know-how gained through highly qualified research staff including process
and electronic engineers. By investing a high percentage of turnover in research and equipment the company maintain its leadership
in water purification system design.
Product advantage
Ocpuritech attained its leading market position with a reputation for innovation, quality and therefore outstanding reliability.
Ocupuritech continue this with its international quality standard ,Acquired the CE ,ISO9001 ,etc.
Our philosophy behind is to achieve highest reliability and performance at the lowest total cost and to provide the best solution
for our customers.
customer advantage
With the vast experience in development, Ocpuritech products have obtained approval and trust of thousands of customers locally
and overseas. The company is capable of undertaking supplying of water treatment equipment locally and overseas to meet the client
required standard.
production advantage
Ocpuritech factory is located in modern city -guangzhou ,not only transportation is very convenient , but also be closed to the
world- class seaport and airport ; can provide you the most cost -effective transport service
Service advantage
We have experience technical team comprising of engineers and technical staff to provide services to our clients locally and
overseas.
Company Profile
Ocpuritech – Guangzhou Aomi Water Purification System Manufacture Co., ltd. The company was founded in 2008, with 12 years technical experience. Ocpuritech is divided into Large Size Equipment Factory and Cartridge Factory. Equipment Factory located at Panyu Guangzhou, Filter Cartridge Factory located at Jiangmen Guangdong. Ocpuritech is a leading manufacturer of PP, CTO filter cartridge, Blue Filter housing, UV System in China. The companies grew over 1000 square meters in the ensuing 12 years. It has been trusted and praised by more than 30 countries. Our main market are South Africa, Peru, Chile, Colombia, Ecuador, Mexico, etc. We depending on warm-hearted services and professional technology experiences, we have been trying our best to excavate commerce application from the science and technology to help customers develop business. With a professional foreign trade team, sales turnover has been increased more than 60% last year. Mrs. Carrie Chan, the owner of Ocpuritech, she hope everybody in the world can drink the pure water which produce by our RO Water Equipment. We’ve always specialized in design, manufacturing and service customization.

Title goes here.

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.