Enquery Now

Send us a Message

We're always here for you, tell us how can we help?
You are here: Waterroplant > sediment

Sediment pp filter cartridge for water treatment plant

1. It can effectively remove all kinds of particle impurities in the filtered liquid;
2. Multi layer deep structure is available, absorb large amount of pollution;
3. Large filtration flow and small pressure difference;
4. No chemical adhesive, more hygienic and safe;
5. It is resistant to acid, alkali, organic solution and oil and has good chemical stability;
6. It integrates surface, deep layer, coarse and fine filtration, with large flow, corrosion resistance, high pressure and low
cost. It is used to block the rust, sand, insect eggs and other large particles in the water.
PP cotton filter cartridge, also known as polypropylene melt blown filter cartridge, is the first defense barrier in the filtration of water purifier. It is like a striker in the front of a football field, creating opportunities for shooting. The ppcotton filter element adopts the external pressure filtration principle, which determines its large pollutant carrying capacity and excess water, which can effectively block the large particle impurities such as rust, sediment and colloid in the water (if you install a pre filter, the large particle impurities reaching the ppcotton filter cartridge will be greatly reduced and its service life will be increased), and effectively reduce the turbidity, chroma and visible objects of the raw water.
Most impurities will be filtered here, but its service life is not long. It is generally recommended to replace it within 6 months.
After the water quality is filtered with PP cotton, it comes to our carbon rod filter element. According to the use position, the carbon rod filter element will be divided into activated carbon filter cartridge and post activated carbon filter cartridge, which can play a good adsorption role. This adsorption mainly refers to the adsorption of different colors and peculiar smell in the water, just like sponge absorbing water, Strong adsorption is realized through the developed pores of activated carbon.

Related Products

Detailed Introduction

Filter Media

Polypropylene

Length

10″,20″,30″,40″,

Micron Rating

1, 5, 10, 20,25,30, 50, 75, 100 μm

Inside Diameter

0.8″(20mm), 0.9″(23mm), 1″(26mm),
1.1″(28mm), 1.2″(30mm), 1.3″(33mm), 1.4″(36mm)

 Outside Diameter

2.36″(60mm),2.4″(61mm), 2.5″(63mm), 2.55″(65mm)

Core

PP

Gasket/O-ring

Silicone, EPDM, Viton

End Cap

Flat ,222 O-Ring,226 O-Ring,Fin

 

1. In order to ensure that the water purifier products meet the use needs of customers, the installation personnel shall ensure that the inlet water quality, inlet pressure, inlet flow and water temperature of the water purifier meet the requirements in the product performance parameter table. If the inlet water quality is not municipal tap water, a pre filtration device needs to be added in front of the water purifier. If the inlet pressure is too high (more than 3kg), a pressure reducing valve needs to be installed in front of the water purifier. If the inlet pressure is too small (less than 1kg), a booster pump needs to be installed in front of the water purifier. When the water purifier needs to be installed in front of the water heater and other thermal devices, it shall be ensured that the installation position of the water purifier is lower than that of the water heater, so as to prevent the steam in the water heater from entering the water purifier and damaging the filter element of the water purifier.
2. All pipelines, joints, taps and other water related accessories on the water purifier shall comply with national health standards.
3. Please do not install it outdoors in northern areas to prevent freezing crack of the super filter element and direct sunlight.
4. Do not use excessive force when tightening the threaded joint during installation to prevent the thread of the joint from sliding.
Product packaging

Why Choose Us
Brand Advantage
Established in 2008, Ocpuritech, is one of leading water treatment system assembling and equipment suppliers in city of Guangzhou
in China. The company complete ten years in the water treatment business by 12th June 2018.
Technical Advantage
Nowadays Ocpuritech combines the experience and existing know-how gained through highly qualified research staff including process
and electronic engineers. By investing a high percentage of turnover in research and equipment the company maintain its leadership
in water purification system design.
Product advantage
Ocpuritech attained its leading market position with a reputation for innovation, quality and therefore outstanding reliability.
Ocupuritech continue this with its international quality standard ,Acquired the CE ,ISO9001 ,etc.
Our philosophy behind is to achieve highest reliability and performance at the lowest total cost and to provide the best solution
for our customers.
customer advantage
With the vast experience in development, Ocpuritech products have obtained approval and trust of thousands of customers locally
and overseas. The company is capable of undertaking supplying of water treatment equipment locally and overseas to meet the client
required standard.
production advantage
Ocpuritech factory is located in modern city -guangzhou ,not only transportation is very convenient , but also be closed to the
world- class seaport and airport ; can provide you the most cost -effective transport service
Service advantage
We have experience technical team comprising of engineers and technical staff to provide services to our clients locally and
overseas.
Company Profile
Ocpuritech – Guangzhou Aomi Water Purification System Manufacture Co., ltd. The company was founded in 2008, with 12 years technical experience. Ocpuritech is divided into Large Size Equipment Factory and Cartridge Factory. Equipment Factory located at Panyu Guangzhou, Filter Cartridge Factory located at Jiangmen Guangdong. Ocpuritech is a leading manufacturer of PP, CTO filter cartridge, Blue Filter housing, UV System in China. The companies grew over 1000 square meters in the ensuing 12 years. It has been trusted and praised by more than 30 countries. Our main market are South Africa, Peru, Chile, Colombia, Ecuador, Mexico, etc. We depending on warm-hearted services and professional technology experiences, we have been trying our best to excavate commerce application from the science and technology to help customers develop business. With a professional foreign trade team, sales turnover has been increased more than 60% last year. Mrs. Carrie Chan, the owner of Ocpuritech, she hope everybody in the world can drink the pure water which produce by our RO Water Equipment. We’ve always specialized in design, manufacturing and service customization.

Title goes here.

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.

RELATED PRODUCTS